ASPIRE SA85 ETHERNET DRIVER

In the Recovery settings window, select Backup snapshot image and click Next. Boot to Windows XP 2. Setting Jumper Use the motherboard jumpers to set system configuration options. Remember to disable Spread Spectrum if you are overlocking because even a slight jitter can introduce a temporary boost in clockspeed which may just cause your overlock ed processor to lock up. If, for whatever reason, a part number change is made, it will not be noted in the printed Service Guide. Supervisor Password has higher priority than User Password.

Uploader: Mikajind
Date Added: 3 March 2007
File Size: 41.92 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 32132
Price: Free* [*Free Regsitration Required]

Parameter 26 Description Product Names Displays the model name of your system. During the disassembly process, group the screws with the corresponding components to avoid mismatches when putting back the components.

Intel is a registered trademark of Intel Corporation. Chapter 2 This option is for setting the shutdown temperature level for the processor. This lower the better, but some DRAM does not support low figures.

Use the arrow keys to scroll to the language version you want. General Help Chapter 2 Advanced Chipset Features The advanced chipset features setup option is used to change the values of the chipset registers.

On This item is to set the Gate A20 status. Removing the DIMM 1.

  AZTECH 56K EXTERNAL MODEM DRIVER

Acer Aspire SA85 Technical information |

Loosen these scerws total screws are 8 from the mainboard. Slide the side door out. Enter the password to proceed. Disconnect the power cable from the mainboard. To disassemble the computer, you need the following tools: Disabled This option is used to set video off option.

Loosen the two screws on each side to detach the HDD. Chapter 4 Troubleshooting Please refer to generic troubleshooting guide for trougleshooting information relating to following topics: Chapter 3 Standard Disassembly Procedure This section tells you how to disassemble the system when you need to perform system service. Pentium 4 and Celeron are trademarks of Intel Corporation.

Acer Aspire SA85 Parts and accessories

Jumpers with more than one pin are numbered. You can cause fatal errors or instability if you install the optimized defaults when your hardware does not support them.

System means that a password prompt appears every time when the computer is powered on or when end users try to run Setup. Re-install bundled software without CD Acer eRecovery stores pre-loaded software internally for easy driver and application re-installation. Disconnect the PSW fan cable from etherndt mainboard. Extended memory is not configured in any special manner and is therefore unavailable to most DOS programs.

It’s a community-based project which helps to repair anything. The Acer Recovery main page appears.

Ethernet Controller driver free download for windows – Acer – Aspire SA85

If it fails to find a device, change the value to Manual and then manually configure the drive by entering the characteristics of the drive in the items described below. Users please note that under NT 4. In this state, no system context CPU or chipset is lost and hardware maintains all system context.

  MULTIPASS F10 DRIVER

In the Recovery settings window, select Backup snapshot image and click Next. The following screen shows the Power Management parameters and their default settings: Remember to disable Spread Spectrum if you are overlocking because even a slight jitter can introduce a temporary boost in clockspeed which may just cause your overlock ed processor to lock up.

Acer Aspire SA85 Win XP Drivers Download

Options None KB, 5. You ethetnet also set it as Manual and go into each of the sub menu to choose specific resources. The message “The system has password protection. Select the desired restore action and follow the onscreen instructions to complete the restore process.