Step 1 Click on Advanced and then Virtual Server. Step 1 Upgrade Firmware if needed. Forgot Password to Dlink DI Router If your Internet Service Provider supplied you with your router then you might want to try giving them a call and see if they either know what your router’s username and password are, or maybe they can reset it for you. Each device must have a unique IP Address; Pressing the Reset Button restores the router to its original factory Don’t show me this message again.

Uploader: Kajishura
Date Added: 28 July 2012
File Size: 22.57 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 58059
Price: Free* [*Free Regsitration Required]

By pressing ‘print’ button you will print only current page.

DI, used in conjunction with other It looks like this: Networking Basics Enter a Computer description and a Computer name optional. To print the manual completely, please, download it. The DI is backwards compatible with Each device must have a unique IP Address; That means that each NetMeeting connection is somewhat different than the last.

TX Rates- Auto is the default selection. Step 2 Click on the Advanced tab and then click Virtual Server on the left side.


D-Link DI router Specs – CNET

By default, it should be Insert a disk into the Floppy Disk Drive, in this case drive A. Enter a name ichat1. Comments to this Manuals Your Name. Enter a Workgroup name.

D-link DI-624 User Manual

You must specify the starting and ending address of the IP address pool. Make sure that all devices are set to Infrastructure mode. Special Applications makes some of these applications work with the DI Check that the drivers for the network adapters are installed properly.

Remember that D-Link AirPro products network together, out of the box, at the factory default settings. With the unit on, use a paperclip and hold down the reset button on the back of the unit for 10 seconds.

Now that you have your router’s Internal IP Address we are ready to login to it.


The default IP Address is RF noise, like microwaves, monitors, electric motors, etc. If any of the above items are missing, please contact your reseller. How to Reset the Dlink DI Router To Default Settings If you still can not get logged in then you are probably going to have to reset your router to its default settings. Page 41 Networking Basics Please follow all the instructions in this window: In the following window, select the best description of your computer.


In this example we’ll use Internet Explorer.

All computers on your network should have the same Workgroup name. Don’t have an account?

It looks like this:. The IP Addresses on your network must be within the same range. Step 3 Enter a name for your virtual server entry ichat3. Networking Basics Please follow all the instructions in this roufer Step 9 Turn off your DSL modem for minutes. D-Link wireless products will allow you access to the data you want, when and where you want it.