DTV2000DS LINUX DRIVER

This page has been accessed 44, times. The frequencies are given in Table 41 in the datasheet http: You should have the card operating correctly now. Still only 1 tuner working. Curiously, the power supply in my machine failed a Dell OptiPlex – Small Form Factor and I connected the machine up to a bigger power supply from another machine.

Uploader: Mazuhn
Date Added: 7 December 2009
File Size: 16.82 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 89653
Price: Free* [*Free Regsitration Required]

The frequencies are given in Table 41 in the datasheet http: Then shut down your computer important if you’ve been trying to load this card already, as the correct firmware will be loaded and turn it on again The previous firmware version is more stable. I’ve also experimented with inputlirc but this didn’t resolve my problem.

V4L/DVB: af support for Leadtek WinFast DTVDS [Linux ] – Linux Kernels

Disabling the power management on the USB bus fixed this problem. The real solution is based on the bug found in http: If you have recent kernels such as 2. Curiously, the power supply in my machine failed a Dell OptiPlex – Small Form Factor and I connected the machine up to a dtv20000ds power supply from another machine.

The rest of the process is still the same.

  1200CU PLUS MUSTEK DRIVER

V4L/DVB: af9015: support for Leadtek WinFast DTV2000DS [Linux 2.6.34]

Retrieved from ” https: After a while it would lose that tuner and the only way to get it to work again was to cold boot.

If not, double check the process, check for errors that might have been missed, and if it all fails, post to a forum.

However there is a patch missing which enables support: This seems to be caused by power management on the USB bus. This linyx is from http: This is based on debian flavours. In Brisbane I have had odd results with channel 9, first time showing this station fails to lock but after checking other channels it then works.

I Gregoryo have had no success with the remote, but there is hope from dmesg:. Until then we all have to sweat it a bit!! This is based on the following commit: It is currently not supported out of the box, though it can be made to work in some circumstances. Am I missing a kernel driver module? Playing around with the delay and repeat settings didn’t make any difference. If dtv2000ds have a quick look inside the file just out of interestyou will notice that how this bug was messing up all the tuner frequency calculations.

  LOGITECH VX NANO MOUSE DRIVER

There is another issue that better get fixed and it is to do with I2C byte write numbers. For example, you press CANCEL twice but the driver recognises three key presses so you end up in menu screens you didn’t intend.

Two channel tuning on this oinux at least now works out of the box on kernel 2. Here I am referring to a specific tag of the repository, i. It emulates a keyboard so no LIRC required.

Digital Tuner Cards

The second tuner has been fine for 4 dhv2000ds now without a single reboot. This fix is from discussions here http: Second tuner only works on rare occassions. I get no indication of any signal coming dtv2000dw the remote. This page has been accessed 44, times. The remote control emulates a keyboard but it very often generates more keypresses than what was put in. This was the only way I could get a pair of recently unresponsive DS cards to start working again – the ATX power button cycling wasn’t enough.