When you select Load Optimized Defaults, a message as below appears: The data on the mirroring drive may be different from the source drive. When the motherboard detects CPU is running programs, it will speed up CPU automatically to make the program run smoothly and faster. Quick Component Guide Choose the Hardware tab, then click the Device Manager tab.

Uploader: Arashizil
Date Added: 3 October 2011
File Size: 56.66 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 27898
Price: Free* [*Free Regsitration Required]

Click on the Next button to proceed the installation in the welcoming window. This helps you to ausio the CPU overheating problem. The Spread Spectrum function reduces the EMI generated by modulating the pulses so that the spikes of the pulses are reduced to flatter curves.

The advantage of an Array is to provide better performance or data fault tolerance. Deleting a disk array will destroy all the data on the disk array except RAID 1 arrays.

The specification of hard disk drive will show up on the right hand according to your selection. A-7 vii Getting Started Chapter 1.

MSI MS Drivers Download

This can prevent data loss if the operating system fails or hangs. Software Access Point Tech Support Guy is completely free — paid for by advertisers and donations. Your name or email address: If you find the PC appears to be unstable or reboot wudio, it’s better to disable the Dynamic Overclocking or to lower the level of overclocking options.


Refer to the following diagram and caption for the function of each jack on the back panel when 4-Channel Mode is selected. While doing the installation, be careful in holding the components and follow the installation procedures.

Instruction manual | MSI KT880 Delta Motherboard

auido AGP Voltage AGP voltage is adjustable in the field, allowing you to increase the performance of your AGP display card when overclocking, but the stability may be affected. AGP is an interface specification designed for the throughput demands of 3D graphics.

In this Speaker Configuration dialogue box, select the audio configuration which is identical to the audio jack on your mainboard.

Meanwhile, read the documentation for the expansion card to make any necessary hardware or software settings for the expansion card, such as jumpers, switches or BIOS configuration. Serial ATA uses long, thin cables, making it easier to connect your drive and improving the airflow inside your PC.

Communicates the key across the network. Welcome to Tech Support Guy! When a RAID is deleted, the data on these aufio hard disk drives will be reserved and become two normal disk drives. Hence, the program screens shows here in this chapter may be slightly different from the latest aduio and should be held for reference only. The less the clock cycles, the faster the DRAM performance.

Always read the safety instructions carefully.

low audio – both speakers working but MS says not .. | Tech Support Guy

Please consult your agent for the proper CPU cooler set. Audio Speaker Setting In this aufio, you can configure and test auduo multi-channel audio function, speakers, sound effect and environment. This item applies only when synchronous DRAM is installed in the system. Power Management Features Use this menu to specify your settings for power management.


When using Select Disk Drives, the channel column will be activated. Hardware Setup Hardware Setup This chapter tells you how to install the CPU, memory modules, and expansion cards, as well as how to setup the jumpers on the mainboard. If any speaker fails to make sound, then check whether the cable is inserted firmly to the connector, or replace the bad speakers with good ones. For specified file or specified website, you may enter the file name with the complete path or the website link in the Parameters: Our products are under continual improvement and we reserve the right to make changes without notice.

Any changes made to this setting may cause a stability issue, so changing the DDR voltage for long-term purpose is Audoi recommended. J1 This connector is connected to a 2-pin chassis switch.