An emergency plumber is contrasted with a plumbing contractor, who deals with creating plumbing systems for home remodels and new home construction projects. The distinction between emergency and contract plumbers is important because it is one of the drivers behind the often higher prices found with emergency plumbers. As with other expedient services, you pay for the convenience of having a plumber quickly show up at your door at any hour of day or night.


I thought that my sump pump had ended its life and needed to be replaced. The contractor I found through Home Adviser came out the following day and arrived reasonably promptly.  The technician tested the pump and it wasn't responding. He then checked the  breaker panel and all seemed well. However he checked to see if power was reaching the outlet, it wasn't so he tripped some breakers and reset them and the power to my pump came on and the pump works so a replacement wasn't necessary. He charged $75.00 which I think was reasonable for a call-out fee and time spent.

According to standards set by the federal government, a low-flow showerhead uses no more than 2.5 gallons of water per minute at a water pressure of 80 pounds per square inch. That’s less than half the rate of water used by some older traditional showerhead models. Low-flow showerheads come in two main types, aerating, which creates a mist, or laminar-flow that sends water out in a steady stream.
Our plumbers in Denver handle any plumbing needs you may have. We can unstick a toilet, and we can draw and implement plumbing plans that come with a remodel or complete home build, and we do everything in between. We do leak repair, drain cleaning, toilet repair, garbage disposal repair, water heater services, sewer repair and hydro jetting. We have the knowledge and equipment to do your job in a timely and proper fashion, and that’s what separates us from our competitors.
Even the smallest leak can be costly and lead to potential long-term damage, and letting them go untouched will only further deteriorate your home. Whether you need emergency service or a check-up to determine the location of the leak, call the professionals at Mike Diamond. We’ll visually attempt to detect the leak in your plumbing and repair it the same day whenever possible.
Try a plunger: If it's a double sink, use a wet rag or rubber stopper to block the other drain. Place the plunger directly over the drain until it forms an air-tight seal. If you have trouble forming an air-tight seal with the plunger, run it under some hot water to make it more flexible. Move the plunger up and down to dislodge the clog from the drain.

Hi. I hope someone can help me. I have a has water heater amd it seems to only work when it wants to. Regardless of amount of use some days I have got water and some days it runs out of hot water immediately even if it hasn't been used all day. And some days it runs out half way through a shower. I have already turned the temperature almost all the way up and nothing is helping. Is there a way too fix this or is it time for a replacement?
BrassCraft 1/2 in. FIP Inlet x 3/8 in. BrassCraft 1/2 in. FIP Inlet x 3/8 in. O.D. Compression Outlet 1/4-Turn Angle Valve controls water flow to household plumbing fixtures - faucets toilets dishwashers icemakers washing machines etc. The angle valve is most often used where the water pipe enters the room from the wall. With a 90° turn ...  More + Product Details Close

Plumbing fixtures are exchangeable devices that use water, and can be connected to a building's plumbing system. They are considered to be "fixtures", in that they are semi-permanent parts of buildings, not usually owned or maintained separately. Plumbing fixtures are seen by and designed for the end-users. Some examples of fixtures include water closets[33] (also known as toilets), urinals, bidets, showers, bathtubs, utility and kitchen sinks, drinking fountains, ice makers, humidifiers, air washers, fountains, and eye wash stations.
Bacteria have been shown to live in "premises plumbing systems". The latter refers to the "pipes and fixtures within a building that transport water to taps after it is delivered by the utility".[35] Community water systems have been known for centuries to spread waterborne diseases like typhoid and cholera. However, "opportunistic premises plumbing pathogens" have been recognized only more recently: Legionella pneumophila, discovered in 1976, Mycobacterium avium, and Pseudomonas aeruginosa are the most commonly tracked bacteria, which people with depressed immunity can inhale or ingest and may become infected with.[36] Some of the locations where these opportunistic pathogens can grow include faucets, shower heads, water heaters and along pipe walls. Reasons that favor their growth are "high surface-to-volume ratio, intermittent stagnation, low disinfectant residual, and warming cycles". A high surface-to-volume ratio, i.e. a relatively large surface area allows the bacteria to form a biofilm, which protects them from disinfection.[36]
×